Door hardware ada compliant locks exit devices handles pulls latches and other operable parts on doors shall comply operable parts of such hardware shall be 34 inches minimum and 48 inches maximum above the finish floor or ground.
Interior door handle height.
The australian standard as 1428 1 design for access and mobility part 1.
The other is 1965mm high with the handle at 1015mm from door and floor.
The height of the door handle must be between a minimum of 34 and a maximum of 48.
Most doors for home installation are 80 inches tall and door handles are generally placed on the door three feet from the floor.
The bottom surface of doors and gates on the push side must be smooth to a height of at least 10.
Both handles are 80mm above the top of the cross rail and they both feel too high when i use them.
Fortunately the standards for ada door handle height are not much different than traditional recommendations.
Installers typically drill the hole centered 36 inches above the floor if not specifically instructed to do so differently.
General requirements for access recommends that door handles of all types should be installed at a height not less than 900mm and not more than 1100mm above the plane of the finished floor.
A few exceptions are included in the bill.
As it turned out there is no certain standard for height at which the handles should be attached to interior doors.
The height of the door handle is not so much the problem as the door handle itself.
Personally i think it looks weird.
Simply they must be installed in such a way that at the time of opening or closing the interior door there would be no inconvenience.
One door is 1980mm high with the centre of the handle at 1040mm from the bottom of the door and 1060mm from the floor when the door is shut.
This facilitates access since mobility aids including wheelchair footrests are sometimes used to push or prop open doors.